Product Information

Solid-liquid Separator Slit Saver

What is Solid-Liquid Separator  ‘Slit Saver’ ?

As the words suggest, it is a device for separating solid component from liquid.

There are many kinds of solid- liquid separators in the world. However, all most all of those machines get clogged during operation. The clogging causes the decline in treatment capacity and sometimes a device would become completely useless in the end.

To prevent those problems, devices require filter replacement or labour-consuming cleaning.

Slit Saver is a device which reduces the loss of treatment capacity and the time and labour for cleaning and provides stable operation.

Features

  1. Self-Cleaning Mechanism – clogging hardly ever occurs
  2. Stable Operation (due to No Clogging)
  3. Low Electric Consumption (1.0 – 1.5kW)
  4. Low Cost (Local Production in Thailand)
  5. Low Noise and Low Vibration (Revolution Speed is 10-20 rpm)

Introductory video of Slit Saver

Installation in THAILAND

Slit Saver System (Dehydration Model)

A continuous sludge dewatering system combining trouble-free Slit Saver and flocculants.

Features

  1. Treatment managed easily by adjustable rotation setting
  2. Stable feeding of sludge and high treatment capacity by furnishing the efficient dewatering device, KDS Separator
  3. Thorough squeezing corresponding to the properties of sludge

Please visit Kendensha Japan Website for videos and treatment flow diagrams etc.

Installation in THAILAND

Neutral Inorganic Flocculant(TENSEY-15A)

Inorganic flocculant with a low environmental impact, made mainly from red soil, which is abundant in Thailand. TENSEY is almost neutral and able to flocculate solid content only by itself. Therefore, there is no need to use many kinds of chemicals. Besides, merely by putting TENSEY directly into wastewater and mixing together, large flocs are formed in a short time. Furthermore, because all the materials are available in Thailand, the price is much lower than other similar flocculants.

Features

  1. Safety
    Since it is mainly made from red soil obtained in Thailand, TENSEY-15A has high safety and low environmental impact. Almost no effect on the natural world.
  1. Shortened Treatment Process
    As there is no need to dissolve flocculant, the treatment process can be shortened.
  1. Fast Flocculation
    When the flocculation reaction occurs, it forms floc quickly and settles down promptly.
  1. Deodorization Effect
    Iron oxide contained in red soil has a deodorizing effect.
  1. Easy to Handle
    Because it is added directly to wastewater, it is easy for anyone to handle.
  1. Cost Saving
    All the materials can be obtained in Thailand, so the cost can be reduced drastically.

Red soil, which usually pollutes the water, cleans the water. Quite the contrary.

Flocculation Test Video

These are the features of TENSEY-15A. The ingredients are below

Product Properties

Ingredients Special Red Soil
Water Hard Mineral
Inorganic Flocculant
Binding Agent
Appearance Reddish brown fine powder
pH(1%) 6.8(tap water)

Components

CaOCalcium Oxide
SiO2Silicon Dioxide
Al2O3Aluminium Oxide
SO3Sulphur Trioxide
Fe2O3Iron Oxide
TiO2Titanium Dioxide
Others

Neutral Inorganic Solidifier(TENSEY-5K)

In the natural world or industrial wastewater, livestock wastewater, etc., there are many highly concentrated types, muddy sludge, in other words. For example, soft soil in the ground, bottom mud in rivers, sludge from abandoned industrial effluents (e.g. untreated sludge stored in palm oil drainage ponds), etc. are very difficult to treat.
Because the concentration is too high, treatment becomes extremely problematic.
With our newly developed solidifier, it is possible to change the sludge from a free-flowing state to a transportable state.
This is TENSEY-5K, a neutral inorganic solidifier with low environmental impact, made mainly from red soil, which is abundant in Thailand.
With the right amount of this solidifier added and stirred, sludge solidifies in a short period of time and the solidified sludge is highly water resistant.
Moreover, on organic sludge, it can be effectively used as a fertilizer by granulating.

The solidification occurs after 2-3 days of natural drying, after mixing with 2-3% of muddy water etc. with a solid content of 10% or more.

Applications and Markets

Palm Oil ProducersSolidification and fertilisation of settled sludge from wastewater ponds
Biomass Plant

Solidification and fertilization of digested sludge

Aquaculture Solidification of settled sludge in aquaculture ponds
Civil EngineeringSolidification of soft soil and ground improvement
Food Related IndustriesSolidification and fertilization of waste
Rivers, etc.Improvement of low quality

Wastewater of Palm Oil Producer

Try my performance for yourself

Initial State Sludge Concentration 18%
TENSEY-5k 2% Added and Mixed
After 3 Days

C.C.KENDENSHA Co.,Ltd.

29 Moo8 Saladaeng11Rd.,Saladaeng Bangnamprew,Chachongsao 24000 Thailand

TEL:(+66) 02-114-8165 (Thai)

          (+66) 080-753-7020 (Japanese · English) Mr. Ujike

Please feel free to contact us

Copyright © 2021 CC KENDENSHA CO.,LTD.